Full recording of this virtual summit gathering 76+ brilliant minds and 500 attendees from 17 countries, 329 organizations is now available for purchase until September 5th, 2020. A purchased recording will be available until May 1st, 2020.

The highly anticipated 3DHEALS 2020 Global Healthcare 3D Printing conference was set to happen at the heart of San Francisco. Due to the current COVID19 crisis, the organizer successfully transformed the multi-track global summit completely online.

What is a better time to polish your skills and getting ready for the next acceleration of your career in this pandemic than learning about cutting edge technology and connect with leaders that will become your mentor, collaborator, and co-founder?

Read about WHY it is even more important to “attend” this conference here.

Meet our 3DHEALS2020 Speakers before the virtual event on camera here, and on our new podcast series here. More technical and in-depth interviews can be found here.

Event Media Coverage:

3DHEALS 2020 Virtual Medical Summit: 3D-Printed Materials in Healthcare (3DPrint.com)

Reimagining Healthcare With 3D Printing (SME)

3DHEALS 2020 Virtual Medical Summit: Comprehensive Look at Craniomaxillofacial 3D Printing (3DPrint.com)

The post 3DHEALS 2020 Virtual Global Summit (Recording) 🗓 appeared first on 3DHeals.

On July 20-21, the cellular agriculture research institute New Harvest had their annual conference at the MIT Media Lab in Cambridge, Massachusetts. 3DHEALS Community Manager for Boston, Jess Charlap, attended the conference to investigate the overlap between 3D printing for healthcare, especially bio-printing, and cellular agriculture, also known as lab-grown meat.
What is New Harvest?
Established in 2004, New Harvest supports research that reinvents the way we make animal products. By applying advances in tissue engineering and synthetic biology to growing food, New Harvest plans to revolutionize the supply chain of animal products to continue to provide affordable and sustainable food to a growing population. They call this “cellular agriculture.”
Cellular agriculture can produce eggs, milk, meat, and more without intensive crop and animal farming. Unfortunately, this nascent field is not well supported by existing research funding mechanisms. New Harvest encourages innovation inn cellular agriculture by funding research, bringing together the community, and educating the public in a transparent and science-based manner.
Who Spoke at the Conference?

Conversations

Presenters at the New Harvest Conference ranged from academic researchers, regulators, entrepreneurs, lawyers, biohackers, engineers, industry analysts, and philosophers. New Harvest Communications Directors Erin Kim served as Master of Ceremonies and introduced the speakers. A full list of speakers and topics can be found here.
The exhibit hall featured networking opportunities, samples, and information from startups, researchers, and cellular agriculture adjacent organizations. New cellular agriculture companies like Because Animals, Higher Steaks, Kiran Meats, New Age Meats, and Sea future Sustainable Biotech joined relative old-timers Geltor, Finless Foods, Ecovative, nonfood, and Ginkgo Bioworks. New Harvest Research Director Kate Krueger was on hand to discuss recent grants and projects, supported by informational posters on the far wall of the exhibit hall

Ecovative mycelium furniture

Who Attended the Conference?
Most of the audience members I spoke with were researchers and entrepreneurs looking to build partnerships and learn about where the cellular agriculture industry is headed. Many identified as vegan and were passionate about a future without animal agriculture. Others were fascinated by tissue engineering or the profit potential of disrupting animal agriculture.
Big Themes/Takeaways
A big takeaway from the New Harvest Conference was how far away this technology is from being commercially viable and widely available. The industry frontrunners are very aware of the challenges they will need to overcome in terms of government regulation, scalability, market forces, and public acceptance. Several themes developed over the course of the conference:
Learn from others. The traditional agriculture industry, other ground-breaking technology, manufacturing engineers, and academia can all contribute to a successful commercial launch. Competition among organizations at this stage of cellular agriculture could stifle innovation and hold everyone back. In general, openness has more to offer than secrecy.
Keep an eye on the regulatory pathway. These products are very new. Safety is going to be a key consumer concern. Engaging with government officials early will prevent later roadblocks. A rush to market or dismissal of ethical concerns could prevent effective engagement with the stakeholders needed for widespread acceptance.
Build conversations through stories. Food is an emotional topic. Finding the right language to convince politicians and investors that this technology is safe, viable, and necessary will be key to the future of bio fabrication. A unified voice will benefit the entire industry as it grows. The word “meat” is a particular point of tension between the traditional and cellular agriculture industries. (see this article in the Atlantic for more)
What’s the Connection to the 3DHEALS Community?
I attended the conference anticipating that the main overlap with the 3DHEALS community would be the use of 3D printing for cellular scaffolds and the supply chain issues around cell culture media. While those topics were covered, I was struck by the potential health benefits of food designed at the molecular level as well as the more philosophical issues will probably confront lab-grown organs as well as lab-grown meat.
Again and again, the answer to anticipated challenges was to build coalitions and community. The more supporters and partners cellular agriculture has, the stronger it will be as a market force and the more likely it will be to affect change. 3DHEALS could be a key partner in that coalition. I invite everyone with an interest in 3D printing for healthcare to take a look at New Harvest and similar organizations such as the Good Food Institute. There is a lot we can learn from each other.

The post 3DHEALS goes to the New Harvest Conference! appeared first on 3DHeals.

Location: 3D Printing Cultural Museum, China, Shanghai 

Time: September 7th, 2018. 6:30-9:30 PM

Preliminary Agenda: 

6:30-7:00 PM Networking & Light reception, Tour
7:00-7:10 PM Dr. Jenny Chen and Lisa Zeng – Opening Intro (3DHEALS community manager, Shanghai)
7:10 – 7:15 PM  Zhuli – Intro to the China 3d printing Cultural Museum 
7:15 -7:25 PM Koen Van de Perre (Materialise)
7:25-7:35 PM Daisy Zhu (3D Science Valley)
7:35-7:40 PM Q&A
7:40-7:50 PM Dr. Jing Jianlong, Bachelor/Bachelor, Deputy Chief Technician (Chinese Presentation With English Translation)
7:50 -7:55 PM Q&A
7:55-8:05 PM Danjun Ma, Ph.D. Qingzi Biotechnology (Shenzhen) Co., Ltd., a
8:05-8:10 PM Q&A
8:10-8:20 PM Shi Jun, Deputy Chief Physician/Associate Professor/Medical Doctor, Ninth People’s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine.
8:20-8:25 PM Q&A
8:25 -8:55 PM Panel Discussion
8:55-9:30 PM Networking & Tour
Speakers: 

Dr. Jenny Chen (陈慧洁)
神经放射学家，3DHEALS的创始人，该公司专注于策划医疗保健3D打印生态系统。 她的主要兴趣包括医学教育，医疗保健领域的3D打印以及人工智能。 她还是斯坦福医疗保健公司放射科的现任兼职临床教员。

Dr. Jenny Chen is trained as a neuroradiologist, founder/CEO of 3DHEALS, a company focusing on curating healthcare 3D printing ecosystem. Her main interests include medical education, 3D printing in the healthcare sector, and artificial intelligence. She is also a current adjunct clinical faculty in the radiology department at Stanford Healthcare.

Lisa Zeng 
(3DHEALS Shanghai Community Manager)
曾利，
医学硕士/战略顾问/创新者
曾任职口腔跨国企业亚太区总监、3D打印公司口腔事业部总经理，她致力于推进中国口腔数字化生态链的发展，架起中国与国际尤其是欧美交流的桥梁，为更多口腔医生提供整体数字化、智能化解决方案，改善医生工作流程，缩短患者就医时间
微信：lisazeng2012
>Dr. Lisa Zeng
>MD/ Strategist/ Innovator/ Consultant in digital dentistry, an oncologist by training, held APAC leadership position in both multinational fortune 500 and start-up companies in the dental sector, a reformer in disruptive technology such as 3D printing for dental digital workflow. Her main focus is on curating dental digital ecosystem, full digital solution provider, and artificial intelligence

Email: li.zeng8000@hotmail.com

Koen Van de Perre  (比利时)
Materialise总部在比利时鲁汶，是世界知名的3D打印软件及解决方案提供商，自1990年成立以来，已将其超过27年积淀的3D打印经验融入进一系列软件解决方案和3D打印服务中，成为3D打印行业的中流砥柱。Materialise开放而灵活的解决方案，使得包括医疗保健、汽车、航空航天、艺术设计以及消费品在内的众多行业和领域的用户从中受益。
Koen Van de Perre先生毕业于伦敦大学，具有非常深厚的技术专长与资深的市场经验，目前担任Materialise 大中华区医疗事业部经理。
Headquartered in Belgium, with branches worldwide, Materialise incorporates more than 27 years of 3D printing experience into a range of software solutions and 3D printing services, which together form the backbone of the 3D printing industry. Materialise’s open and flexible solutions enable players in a wide variety of industries, including healthcare, automotive, aerospace, art and design, and consumer goods, to build innovative 3D printing applications that aim to make the world a better and healthier place.
Mr. Koen Van de Perre graduated from the University of London with strong technical expertise and veteran market experiences. He is currently the manager of the Medical Division of Materialise greater China.

Daisy Zhu是3D Science Valley的联合创始人，这是一个专注于增材制造的评论媒体平台。她负责在牙科行业，整形外科行业以及康复器具行业出版3D打印白皮书。她是“汽车工业技术与发展报告中的3D打印”和“3D打印与工业制造”一书的作者之一。她曾在多个医学论坛，创业沙龙和科普活动中担任主讲人。
Daisy Zhu is a co-founder of 3D Science Valley, a commentary media platform focusing on additive manufacturing. She is responsible for the publication of a white paper of 3D printing in the dental industry, orthopedic industry as well as rehabilitation appliances industry. She is one of the authors of the book ‘ 3D Printing in Automotive Industry Technology and Development Report’ and ‘3D Printing and Industrial Manufacturing’. She has been the keynote speaker at several medical forums, entrepreneurship salons, and popular science activities.

景建龙，本科/学士，副主任技师 (With English Translation)
南京大学医学院附属口腔医院/南京市口腔医院 修复工艺科主任
中华口腔医学会修复工艺学专业委员会 副主任委员
南京时代义齿技术研制有限公司 总经理
南京市医疗器械管理协会口腔工艺分会 副理事长

长期从事各类口腔修复体的制作和工艺技术研究，有较强的专业能力和丰富的工作经验。擅长特殊疑难病例的个性化制作和美学修复体制作。关注数字化口腔的发展，参与数字化平台的多学科联合。
近年来有课题研究1项，发表和参与发表核心及统计源期刊论文10余篇。专利4项。

马丹军，中科院生化细胞所博士，美国韦恩州立大学博士后，助理研究员，蛋白质组实验室主任。2016年回国创建清紫生物科技（深圳）有限公司，2017年获得深圳市科创委国际合作项目资助（压电陶瓷材料增材制造的关键技术研发）。入选深圳市孔雀人才计划，担任“上海巴斯德麒麟众创空间”创业导师。发表文章二十余篇，专利8项。
Danjun Ma, Ph.D., Shanghai Institute of Biochemistry and Cell Biology,  Postdoctoral Fellow, Research Assistant Professor, Director of the Proteomics Laboratory at Wayne State University, USA. In 2016, Dr. Ma returned to China to establish Qingzi Biotechnology (Shenzhen) Co., Ltd., and in 2017, he was funded by the Shenzhen Science and Technology Commission International Cooperation Project. The key technology research and development of piezoelectric ceramic materials additive manufacturing). To be selected “the Shenzhen Peacock Talent Program”, and as the “Shanghai Pasteur Kirin Zhongchuang Space” entrepreneurial mentor in 2018. Dr. Ma has published more than 20 papers in peer-reviewed journals and submitted 8 patent application.

史俊，副主任医师/副教授/医学博士，上海交通大学医学院附属第九人民医院。 中华口腔医学会口腔颌面外科专科会员，中华口腔医学会口腔种植专科会员，上海市口腔医学会口腔颌面外科专业委员会青年委员，国际内固定协会（AO/ASIF）会员，国际内固定协会（AO/ASIF）亚太地区讲师1993年9月至2000年7月就读于于上海交通大学医学院（原上海第二医科大学），毕业后获口腔医学硕士学位。其后于上海交通大学医学院附属第九人民医院口腔颌面外科工作至今，主要从事口腔颌面部畸形的治疗的临床和科研工作。2003年9月至2006年6月，于上海交通大学医院原攻读口腔临床医学博士学位，师从中国工程院院士邱蔚六教授； 2008年赴德国Hannover大学进修。
史俊医师在口腔颌面部畸形的治疗和研究中具丰富工作经历，同时在应用医学图像分割、三维重建、口腔颌面外科手术导航等领域积累了丰富的研究经验。目前已发表第一作者论文11篇，参编著作3部。 主持上海市局级科研项目2项，国家教育部科研项目1项。

Shi Jun, Deputy Chief Physician/Associate Professor/Medical Doctor, Ninth People’s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine. Member of the Oral and Maxillofacial Surgery Department of the Chinese Stomatological Association, member of the Oral Implantology Specialist of the Chinese Stomatological Association, Young Member of the Oral and Maxillofacial Surgery Committee of the Shanghai Stomatological Association, Member of the International Association of Internal Fixation (AO/ASIF), International Association of Internal Fixation ( AO/ASIF) Asia-Pacific lecturer studied at Shanghai Jiaotong University School of Medicine from September 1993 to July 2000 (formerly Shanghai Second Medical University) and obtained a master’s degree in stomatology after graduation. Later, he worked in the Department of Oral and Maxillofacial Surgery of the Ninth People’s Hospital affiliated to Shanghai Jiao Tong University School of Medicine. He is mainly engaged in the clinical and scientific research of the treatment of oral and maxillofacial deformities. From September 2003 to June 2006, he studied doctoral degree in oral clinical medicine at Shanghai Jiaotong University Hospital. He studied under Professor Qiu Weiliu of the Chinese Academy of Engineering. In 2008, he went to Hannover University in Germany for further study. Dr. Shi Jun has a wealth of work experience in the treatment and research of oral and maxillofacial deformities, and has accumulated rich research experience in the fields of medical image segmentation, three-dimensional reconstruction, oral and maxillofacial surgery navigation. At present, 11 first author papers have been published and 3 books have been edited. He has presided over 2 Shanghai-level scientific research projects and 1 research project of the Ministry of Education.

Thanks to our sponsors: 

The post 3DHEALS Shanghai: Unveiling Chinese Healthcare 3D Printing Ecosystem 🗓 appeared first on 3DHeals.

About this Event:
3DHEALS community events focus on creating educational content and networking events with highly selected speakers and audiences all over the world. This will be the first such event in Singapore. The event is limited to 50 attendees. 
 
Location: 
National University Singapore
Seminar room, Innovation 4.0 Building
3 Research Link 
Singapore,117603

[pdf-embedder url=”https://3dheals.com/wp-content/uploads/2018/08/Getting-to-Innovation-4.0.pdf”]
Time:
Wed, September 5, 2018
6:30 PM – 9:30 PM Singapore Standard Time Singapore Time

Agenda: 

6:30-7:00 PM Networking & Light reception
7:00-7:10 PM Opening Intro by Dr. Jenny Chen and Mahendran Reddy (3DHEALS Singapore Community manager, NAMIC)
7:10 – 7:20 PM Sean Looi is the General Manager of Creatz3D Pte Ltd
7:20-7:25 PM Q&A
7:25-7:35 PM Dr. Chaw Sing Ho, co-founding Managing Director of NAMIC (National Additive Manufacturing Innovation Cluster)
7:35-7:40 PM Q&A
7:40-7:50 PM Dr. Ching Kit Chen, Pediatric Cardiologist, KK Women’s and Children’s Hospital
7:50 -7:55 PM Q&A
7:55-8:05 PM Dr. Shweta Agarwala 
(Singapore Centre for 3D Printing@ Nayang TechnologicalUniversity)
8:05-8:10 PM Q&A
8:10 -8:40 PM Panel Discussion
8:40-9:30 Networking
About Speakers:
Jenny Chen, MD – 3DHEALS

Jenny is trained as a neuroradiologist, founder/CEO of 3DHEALS, a company focusing on curating healthcare 3D printing ecosystem. Her main interests include medical education,  3D printing in the healthcare sector, and artificial intelligence. She is also a current adjunct clinical faculty in the radiology department at Stanford Healthcare.
Mahendran Reddy – 3DHEALS Community Manager, NAMIC

Mahendran Reddy is a highly driven professional with 20 years of international professional experience in the creative industries in both the private and public sectors.
As a trained architect and a media personality, he has held key strategic appointments in driving innovation and initiatives in the civil service, notably the establishment of the National Design Centre in Singapore.
At UCT, he has driven the adoption of Additive Manufacturing in its fledgling form in South East Asia mainly in the consumer segment of the business.
At NAMIC, he is actively involved in the adoption of Additive Manufacturing in the Industries by initiating collaborative research projects with Industry and Institutes of Higher Learning.
He brings with him an in-depth knowledge in management, government processes and procurement, design thinking skills and excellent interpersonal and professional competencies.
Dr. Chaw Sing Ho

Dr. Chaw Sing Ho is the co-founding Managing Director of NAMIC (National Additive Manufacturing Innovation Cluster), a Singapore government initiative to catalyze innovation and scale industrial adoption of additive manufacturing technologies. By focusing on industrial applications and translational R&D, together with commercial strategies to co-create innovative products and services, the national initiative aims to position Singapore as one of the leading digital manufacturing hubs in the era of digitalization and smart factories. Since its inception two years ago, NAMIC has raised more than $24 million in public-private funding to support various AM initiatives across industry verticals.
Prior to NAMIC, he oversaw IP Innovation Strategic Partnerships at HP Singapore. Before that, he was the global head of manufacturing supply chain operations and product innovation for the consumer inkjet supplies business in HP. Chaw Sing started his career in the semiconductor industry with Chartered Semiconductor and Globalfoundries, where he undertook various leadership and customer-facing roles in technology development and engineering operations.
Chaw Sing holds a doctorate in Electrical and Computer Engineering and a Bachelor’s (honors) degree in Electrical Engineering majoring in Microelectronics from the National University of Singapore (NUS). He is an avid inventor with several US/international patents. An advocate for 3D Printing and its role in the new economy, he has spoken in various forums and workshops. He mentors a number of start-ups in the digital and healthcare space. He sits on a number of advisory and expert committees and is an appointed mentor under the GE Digital ASEAN Startup and Partner Program. He is personally interested in nurturing deep tech start-ups, as well as advancing STEM education and engineering as a profession. In his free time, he enjoys sports, movies, reading and spending time with his family.
Dr. Chen Ching Kit

Dr. Ching Kit Chen completed his undergraduate medical studies at the National University of Singapore and post-graduate training in Paediatrics and Paediatric Cardiology in Singapore. He subsequently did a fellowship in pediatric heart failure, mechanical circulatory support and heart transplantation at the Hospital for Sick Children, Toronto, Canada.  During his 2-year fellowship, he participated in a range of research projects resulting in numerous abstracts and publications. Upon returning to Singapore, he has started a pediatric advanced heart failure program (including mechanical circulatory support for children) in KK Women’s and Children’s Hospital and has successfully established a pediatric heart transplant and mechanical cardiac support program in Singapore.  His clinical areas of interest cover dilated cardiomyopathy, exercise echocardiography in cardiomyopathy and congenital heart disease, and fetal cardiovascular flow dynamics, while research areas of expertise and experience include 3D printing of heart models, exercise echocardiography, and fetal cardiology.
Sean Looi

Sean Looi is the General Manager of Creatz3D Pte Ltd, the authorized distributor of Stratasys™ 3D printing systems and materials in Singapore, Vietnam, and Indonesia. Creatz3D’s additive manufacturing solutions also include Arcam™ for production of metal components as well as Materialise™ Rapid Prototyping Softwares. 
Despite majoring in MSc Finance, Sean’s passion for 3D printing opened the door of opportunity of distributing 3D printing technologies in 2007. His knowledge in various manufacturing practices placed him in a favorable position to advice on advanced solutions for direct digital manufacturing.
Sean’s accumulated technical experience with a variety of different 3D printing machines, technologies, and applications, across all industry sectors, helped him to gain foresight into the macroeconomy of additive manufacturing potential.
In return, Sean has been actively helping companies various sectors think more critically, innovate better to improve workflow and is highly respected in the local Additive Manufacturing committee. With over 6 years of experience in the industry, Sean is a regularly invited keynote speaker in various local institutions and events.

Shweta Agarwala is a researcher with Singapore Centre for 3D printing at Nanyang Technological University, Singapore. She holds Ph.D. in Electronics Engineering from National University of Singapore, Singapore. Her research is aimed at developing materials and devices for bioelectronic in healthcare applications, and printed electronics for wearables, sensors and smart packaging. The roadmap employs 3D printing route of an aerosol jet, inkjet, and bio-printing to fabricate nano-electronic and bioelectronic devices. Her research is multidisciplinary in nature and provides a useful link between electronics, material science, manufacturing, and biotechnology, thus trying to solve real-life problems.

Registration

Thanks to our sponsors:

The post 3DHEALS Singapore: Healthcare 3D Printing and Beyond 🗓 🗺 appeared first on 3DHeals.

Introduction
3DHeals is a San Francisco Bay Area-based International community, aiming at connecting healthcare professionals, entrepreneurs, developers, designers, and regulators that are interested in healthcare-related 3D printing technology. It is the world’s largest community of its kind, having events all over North/ South America, Asia, Europe and Australia. This community helps build a platform for both collaborative research and education in 3D printing technology.
The meeting in September is the very first 3DHeals community event in Taiwan. The goal is not only to connect the local community but also to link talented teams with the world. 
Time:
September 11^th, 2018.  6:30 pm – 9:30 pm (GMT+8)
Location:
9F, Third Outpatient Clinic.  No. 201, Section 2, Shipai Road, Beitou District, Taipei
(Taipei Veterans General Hospital Clinical Innovation Center)

Agenda

 
1830-1900 – Networking with Refreshments
1900-1910 – Opening Remarks – Lirng-Yu Yang, MD
Taipei Veterans General Hospital Clinical Innovation Center                 
1915-1920 – Opening Remarks – Jenny Chen, MD  (3DHeals)         
1920-1935 – Surgeon as Designers: A Patient-Specific Safety Device for Transoral Thyroidectomy – Yi-Ting Yeh, MD and Jui-Yu Chen, MD, Department of Pediatric Surgery/ General Surgery, TVGH     
1935-2000 – Metal Additive Manufacturing – Overcoming the Design Limitations, 
Wei-Chin Huang, Ph.D., ITRI  Laser & Additive Manufacturing Technology Center      

2000-2015 – Coffee Break – Networking
2015-2030 – From 2D to 3D to 4D – How Image Processing Transform Surgery – Chao-Ming Chen, MDTherapeutical & Research Center of Musculoskeletal Tumors, TVGH
2030-2045 – From Bench to Market – Biocompatible 3D Printing Materials – Jimmy Su, Ph.D. (CEO Enlighten Materials)   
2045-2100 – Closing Remarks
2100-2130 – Networking
2140 – More Networking and Discussion at “Miso iZakaya” (6 minutes walk)
 
 

     
Speaker’s Bio

Jenny Chen, MD
Dr. Jenny Chen is a Neuroradiologist at Stanford University Hospital. She is also the founder of 3DHeals, the world’s largest educational community for researchers, entrepreneurs, clinicians, and regulators who are doing healthcare-focused 3D printing technology.
She received her MD degree at UCLA Medical School, completed her residency at UCLA Medical Center and Neuroradiology fellowship at Massachusetts General Hospital.  

 Jui-Yu Chen, MD
Dr. Jui-Yu Chen is an attending surgeon at the Division of General Surgery, Taipei Veterans General Hospital and a director at Taiwan Association of Endocrine Surgeons. He completed his research fellowship at the Division of Endocrine Surgery at the University of Wisconsin-Madison Hospital and Columbia University Medical Center. His excellence in thyroid surgery has helped tens of thousands of patients. He has never stopped the pursuit of improving clinical outcome. He introduced Transoral thyroidectomy which is a surgery that can remove pathologic thyroid through the incision in the mouth, keeping the surgical scar invisible. This procedure is highly technical dependent. Dr. Chen is optimizing the outcome and lowering the complication rate of this surgery by creating innovative devices through 3D design and printing technology. 
Chen received his bachelor degree of Medicine from Taipei Medical University, Taipei, Taiwan.

 Yi-Ting Yeh, MD
Dr. Yi-Ting Yeh is an attending surgeon at the Division of Pediatric Surgery, Taipei Veterans General Hospital, Taiwan and a lecturer of Surgery at National Yang-Ming University. Previously, he had conducted in several clinical studies in the implication of Three-Dimensional Printing and was awarded for the best paper in Surgical Field in 2015, Journal of Chinese Medical Association and was honored of the rising star award at 2017 Joint International Congress of International Liver Transplantation Society, ELITA & LICAGE.
Yeh received his MD degree from National Yang-Ming University, Taipei, Taiwan.
Wei-Chin Huang, PhD
Wei-Chin Huang is an engineer/researcher at the Laser & Additive Manufacturing Technology Center, ITRI, Taiwan. He previously served as the project leader of the research projects for Medical Device Product using Additive Manufacturing, ITRI, and R&D specialist at the Factory of Intelligent Additive Manufacturing Medical Devices, ITRI.
Huang received his master and Ph.D. degree of Materials Science and Engineering from National Cheng-Kung University, Tainan, Taiwan.
 
Chao-Ming Chen, MD, PhDc
Dr. Chao-Ming Chen is an Orthopedic surgeon at the Therapeutical and Research Center of Musculoskeletal Tumor at Taipei Veterans General Hospital. Chen received his MD degree at Taipei Medical University. His research focuses on applying 3D technologies in optimizing the care of Musculoskeletal tumor patients. His cross-disciplinary and in-depth experience in both 3D printing and MSK surgical oncology make him an outstanding clinical innovator. The work, he and his team, developed has benefited numerous surgeons and patients.    

Dr. Yuan-Min Lin, D.D.S., M.Sc.(Hons), Ph.D
Dr. Yuan-Min Lin is a Professor at the Department of Dentistry, National Yang-Ming University, Taiwan. He has prolific publications in the field of tissue engineering, biomaterials, and regenerative medicine and regenerative dentistry. He is one of the leaders of 3D printing technology around dentistry.
Lin received his Ph.D. in Tissue Engineering at the Department of Chemical Engineering, Imperial College London, MSc (hons) in Biomedical Materials at IRC in biomedical materials, Queen Mary, University of London and DDS, Doctor of Dental surgery, National Yang-Ming University, Taipei, Taiwan.
 

 Jimmy J.M. Su, PhD
Jimmy J.M. Su is currently the CEO of the Enlighten Materials Ltd. company, which is a spin-off company from National Yang Ming University. He has 10 years of research experience at the National Health Research Institute. Recently, Jimmy and his team are working on the development of biocompatible 3D printing materials for dental application. 3D printing material for surgical guide fabrication has been approved by Taiwan FDA and CE. In addition, two 3D printing denture materials are ongoing to apply FDA 510(k) this year. He believes that 3D printing can provide better complete dentures for elders in the future.
Team
 
Direction

Conference Venue – No. 201, Section 2, Shipai Road, Beitou District, Taipei City, 112 (9F, Third Out-Patient Clinic, Taipei Veterans General Hospital)
Post-conference Meetup – Miso Izakaya – No.5, Ln. 130, Tianmu W. Rd., Beitou Dist., Taipei City 112, Taiwan
By MRT: 8 minutes walk from MRT Shipai Station
By Car: Hospital parking 30NTD/hr (No. 201, Section 2, Shipai Road, Beitou District, Taipei City)

Special Thanks:

The post 3DHEALS Taipei: 3D Printing in Healthcare – What’s next after the hype?  🗓 🗺 appeared first on 3DHeals.