This topic contains 1 reply, has 1 voice, and was last updated by  Jose Adams 1 month, 1 week ago.

Viewing 2 posts - 1 through 2 (of 2 total)

Forum replies



  • Jose Adams
    Participant
    Jose Adams

    Use of a two-part platform allows for its easy removal after the printing process is finished. Thanks to this feature, the model can be easily removed without causing any calibration issues. Perforations on the platform allow to print using materials based on ABS which have a tendency to warp. They prevent the model from peeling off during printing process. Additionally, an extra layer of raft is used as a special base for the object. This is very important for printing large models. The platform is heated to the correct temperature for each type of filament. Wide range of temperatures (from 20° C to 110° C) allow to print using many kinds of materials.

    #8662

    Jose Adams
    Participant
    Jose Adams

    The fast and easy answer is Print In London. And why we are open all day as there are not too many print shop are open 24 hour but sometime customer need some printing overnight and last moment so they require urgent printing service London where they can print their last minute print jobs. # all night printing.

    #10061
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.